Robot Lawn Mower H750 Grass Cutter WIFI Controlled

Description

Robot Lawn Mower Grass Cutter WIFI Controlled, Li-ion Battery,Auto Recharged, Anti-slip, Antistall, Cordless Garden Tools

Function of H750

– Lift sensor

There are lift sensors located between the top and middlecover. If the mower is lifted from ground, it will stops working within 1 second.

– Tilt sensor

There are tilt sensors installed on the mower too, whenthe mower is tilted over 30 degrees in any direction, it stops working within 2 seconds.

– Bump sensor

The bump sensors that will activate when the mower strikes solid, fixed object when that object is at least 6cm in vertical height from the supporting surface of the mower. When the bump sensor activated, the mower will back up for working.

– Rain sensor

There are two rain sensors located on the mower. The mower will go back to the charging station automatically when it’s raining.

Rain sensors can be selected ON/OFF from APP

Turn on: the mower will go back home if it is raining.

Turn off: the mower will go on mowing when it is raining.

– Wifi

The IOS user can search “EGROBOT” in the Apple Store to download the application.

The Android user search “EGROBOT” in the Google Store to download the application.

– Area working time setting(mowing schedule)

Set up one week (From Monday to Sunday, once foreach day) cutting schedule from APP.This function should be used together with Area location setting.

– Cutting width: 18cm

– Easy cutting height adjustments

The cutting height could be adjusted on the mower bottom cover cutting height adjustment knob via the equipped spanner.

– Auto recharge system

When the mower senses a low battery situation, it will shut off the cutting motor and search for the virtual wire. Once found it will follow the virtual wire to the charging station for recharge automatically. Once charging is complete, the mower will back up a few centimeters ready to go again in stand by mode.

– Emergency stop switch

There is an emergency button located on the top of mower and in red color.

Press it to turn on the mower .

Press it again to turn off the mower.

– Two cutting modes

There are two cutting modes of the mower, go straight and go circle (high efficiency). In Auto, mower selects cutting mode intelligently. It goes straight if the grass is sparse or it has be cut off,and it goes circle if the grass is dense or long. In manual mode, the mower will go where you direct it.

– Virtual wire

The robot lawn mower can’t be operated without a virtual wire. (we suggest to use 100m-600m of virtual wire). The mower will follow virtual wire to charging station, the virtual wire acts as a virtual fence. It will get on the virtual wire until it meets charging sheets, then it gets off from virtual wire and starts cutting inside.

Mower stops working if virtual wire is cut off or charging station is power off.

If virtual wire is cut or broken, or the charging stationloose power, the mower will stop working within 3 seconds

– Three steps to safely start the mower

1. Connect charging station with power supply by charger and make sure the recharging light is in green color.

2. Connect virtual wire to charging station and make sure it is in good connecting(virtual wire light in colorless).

3. Press emergency button and start auto mode.

– Overload protect

The cutting motor and running motor are monitored continuously during operation for any situation that may cause these motors to over-load.

In the event this is detected, the mower stops operating.

– Waterproof

Waterproof design, which protect inside parts from humidity.

The waterproof class is IP54

Please stop the robot mower under rain cover or other waterproof shed while raining! And if the lawn is with high humidity, it’s best not send the robot out working.

– Gyroscope

The mower has gyroscope to keep it going straight on inclines.

– Area location setting(Subarea setting)

You can select Subareas for the mower to cut. This works

well for large lawn. See Section 6.4.

–